VIBRATORY MOTORS
INTRODUCTION:
STAR TRACE Vibratory motors are Robust, Reliable, High Loadable, Quiet Running and require no maintenance.
STAR TRACE Vibratory motors are totally enclosed 3Phase, Squirrel cage induction motors with adjustable, eccentric weights mounted at both ends of the shaft, to set up vibrations during rotation. The design of shaft and the selection of bearings has been carefully done to withstand heavy radial loads.
USES:
- Plastics
- Food
- Petro-chemical
- Process/Packaging
- Mining
- Cement
- Power Stations
Technical Data:
| Centrifugal Force Range | : | From 42 to 14250N |
| Operating torque range suitable for vibrating units | : | From 3.6 to 3600 Kgs. |
| Working weight range | : | From 1 to 6000 Kgs. |
| Power connection | : | From 3Phase current with 50 Hz 415V A.C. |
| Rated consumption | : | 0.1 to 10KW. |
| Ambient temperature | : | Upto 60 deg.C |
| Degree of protection | : | IP 65as in DIN 40 050, P.2 or IP 55as in DIN IEC 34, Part 5. |
| Insulation class | : | F class. |
Features
The following are the features of Vibratory Motor:
- Increased efficiency.
- Enhanced reliability & low maintenance.
- Rugged construction for tough environment.
- Cylindrical roller bearing. Pre lubricated for long life.
- Robust design, body made from high grade C.I. casting
- Totally dust proof air cooled design. Can operate in dusty environments.
- Winding F-Class insulated. Impervious to dust, moisture & vibrations.
- Vibration force adjustable from zero to maximum by adjusting position of unbalance weights.
Applications
These motors are used in various material handling equipment such as vibrating screens, conveyors and feeder. They are also used on hoppers, silos to prevent congestion of material flow. Foundry shake-outs and compacting machines use these motors for fast and efficient operation.
Their Special Essential Characteristics are:
- One of two lifting lugs.
- Absolutely secure centrifugal mounting.
- Quality-tested components, each motor tested under load.
- Reliable starting by means of a high-powdered starting torque.
- Permanent and well legible setting marketing of the unbalanced weights.
- Vibration-proof joining through the considerable Tensility of the mounting screws.
- Dust-tight and water-tight through a sealing covering with special circular rubber washer.
- Universal mounting facilities through an optimum choice of inter spacing in the base mounting.
- Embedded in high-quality impregnating resin vibration-proof winding, insensitivity to damp and dust.
- Generously dimensioned cylindrical roller bearing, self lubricating maintenance-free, long life expectancy.
Specification
Technical Data of Vibratory Motor
| Type | Maximum Operating Torque KgCm |
Maximum Centrifugal Force |
Suitable for Vibratory Equipment within Weight Range of Kg to Kg |
Weight Approx |
Rated Output KW |
Rated Current of 50Hz 415V A |
|
| 2-Pole motor with approximately 2800rpm:- | |||||||
| ST-4 | 4.0 | 2200 | 20 | 70 | 22 | 0.19 | 0.8 |
| ST-6 | 8.0 | 4000 | 50 | 100 | 24 | 0.37 | 1.0 |
| ST-8 | 12.0 | 6100 | 110 | 360 | 28 | 0.75 | 1.4 |
| ST-10 | 21.0 | 10200 | 200 | 610 | 44 | 1.10 | 1.6 |
| 4-Pole motor with approximately 1440rpm:- | |||||||
| ST-4X | 22 | 2250 | 35 | 70 | 24 | 0.19 | 0.8 |
| ST-6X | 35 | 4300 | 55 | 175 | 31 | 0.37 | 0.9 |
| ST-7X | 52 | 6400 | 100 | 275 | 36 | 0.51 | 1.10 |
| ST-8X | 78 | 9500 | 1600 | 415 | 50 | 0.75 | 1.50 |
| ST-10X | 125 | 16000 | 300 | 730 | 72 | 1.1 | 1.90 |
| ST-12X | 150 | 22000 | 350 | 900 | 76 | 1.49 | 2.30 |
| 6-Pole motor with approximately 950rpm:- | |||||||
| ST-10W | 210 | 11450 | 160 | 410 | 96 | 1.1 | 1.8 |
| ST-12W | 420 | 22950 | 460 | 960 | 120 | 1.49 | 3.0 |
| ST-14W | 630 | 34600 | 750 | 1500 | 150 | 2.30 | 5.7 |
| ST-16W | 960 | 52600 | 1030 | 2180 | 285 | 2.74 | 6.5 |
| ST-18W | 1275 | 70150 | 1480 | 3000 | 320 | 3.87 | 9.0 |
