Other Equipments

Approx. 3.25 Lakh / Unit Get Latest Price

Trommel Screens is consist of five parts as drum, frame, hopper, reducer and motor. After the broken stone into the drum, on the one hand, materials being screened along with the rotation of drum, on the other hand, the bigger materials flow forward along the direction of slope and be separated by the screen with different number of meshes. The different materials fall into different hopper and then be sent to different finished product stacks by manpower or belt conveyor.

Features:

• Configured for economical efficient classification, Screening and grading
• Heavy duty trommel drum with lifters at the front to facilitate material break up
• Screen replaceable for different mesh sizes
• Multiple screen size
• Easily changed screen plates
• Largest processing capacity in the industry
• Unique screen design, result in higher capacities, longer screen life and no material clogging
• Heavy duty feed hopper and extension
• Discharge chute
• Gear drive mechanism
• Variable speed drive mechanism

Application:

• According to different sizing specification, the numbers of hierarchical level could be from one to four. materials whose size is larger than the screen mesh of the last part will be discharged from the outlet. During the process of operation, its movement is slowly and steady and installation is simple, sometime no need any special foundation and could be placed on smooth ground or floor. It is the most commonly used classification device for refractory material, coal, river sand and mixture of sand and stone.

Approx. 2.25 Lakh / Unit Get Latest Price

Thickeners are used for dewatering slurries of either tailings or product. A thickener is a large circular tank that is used to settle out the solid material from the water in the feed slurry.
It is widely used for dealing with slime, wastewater, waste residue in metallurgy, mine, coal, petrochemical industry, building materials, environmental protection department etc.

Features:

• Deaeration cell is provided to prevent solid particles from attaching to bubbles so that solid particles can fall like a parachute.
• The mineral-feeding pipe is lower than the pulp surface, it prevents the air to be brought in while feeding.
• Inner overflow weir is equipped to make the pulp flow on pre-designed route, avoiding short circuit, enlarging the sedimental area.
• The peg linear is changed from oblique lines to curves. So the discharging underflow has higher density, and treatment capacity is enhanced.

Principle:

• This thickener consists of round thickener and harrow scrapping machine, the solid particles suspend in thickener settling by gravity, the pulp in the upper turn into clean water, so that the separation can be realized.

Technical specifications:

Approx. 2,000 / Tonne Get Latest Price

We are leading manufacturer, Supplier exporter of Copper Slag. This product is appreciated for its hardness and free from silica. Our products are made up of using premium quality granulated slag in order to maintain their adherence to universally accepted norms. The offered products are widely demanded in domestic as well as international markets.

Applications:

• Roofing Granules
• Pipeline Blasting
• Corrosion Cleaning
• Garment Textile Blasting
• Jean Clothing Sandblasting
• Golf Course Filler
• Paints and Coatings
• Sandblasting, Surface Prep
• Grinding Wheels
• Offshore oil pipeline blasting
• Blast Cleaning
• Asphault anti-skid additive
• Slag Wool Insulation

Specifications:

• Colour: Blackish Gray, glassy
• Grain Shape: Multifaceted
• Hardness: >5-7 Moh
• Bulk density at 25: 1.8-2.2 Ton/M3
• pH: 6.5
• Conductivity: At 25 - Nil
• Weight loss on igniton: 1.75-2.0 % at 900 C
• Moisture content: <0.1 %

Slag (Dry Basis):

• Cu 0.6 0.9 %
• Fe (Total) 40 44%
• S 0.8 1.2 %
• SiO2(Combined as Silicate) 33 35%
• Free Silica <0.5 %
• Al2O3 4.0 6.0%
• Cao 0.8 1.5%
• Mgo 1.0 2.0%
• Ni 0.01 0.03%
• Pb 0.01 0.04%
• Zn 0.2 0.3%
• Bi 0.01 0.02%
• Co 0.04 0.13%
• *Fe as feO 50-55 % and as magnetite 1.5 to 5.0 %

Sieve Anaylsis (BSS):

• +10 mesh 33-40%
• +18 mesh 40-42%
• +44 mesh 16-17%
• +72 mesh 2.5- 4.5%
• +100 mesh 0.5-2.0%
• Under 100 mesh 0.3 – 1.7 %

Approx. 1.15 Lakh / Unit Get Latest Price

Star Trace a pioneer company founded by professionals in cashew processing industry. As adjectives to design and manufacture a comprehensive range of cashew processing machineries of international standards.

Specifications:

Approx. 1.5 Lakh / Unit Get Latest Price

From our wide range of products, we offer optimum quality Magnetic Roll Separator. The offered separator is manufactured using optimum quality components and high-end technology. We offer this separator in different sizes, designs and other related technical specifications, in order to meet needs of our prestigious clients. Apart from this, our offered range is rigorously tested by our experts on well-defined parameters to deliver a flawless range at our client's end.

Features:

• Industrial approved design
• High operational fluency
• Easy to operate

Approx. 1.5 Lakh / Unit Get Latest Price

Have long been used for the continuous heat treatment of a variety of raw materials. The rotary retort furnaces is particularly adaptable to controlled atmosphere operation up to 500°c. These furnaces are particularly well suited for the processing of raw materials because the rotary conveying action tumbles the materials, breaking up any jams or tangled clumps facilitating more thorough heat treatment of each of the individual part. The traditional rotary retort concept is not without problems improper and uneven loading, jams of parts formed at the charge end that cannot be broken up in the retort, the maintenance of rotary bearing and seals within the heated shell and the loss of controlled atmosphere. The rotary retort has a charging door mechanism that works with a loading mechanism to load controlled, pre-selected weight charges of uniform size parts into the retort, minimizing the loss of any controlled atmosphere. Cantilevered retort design the stainless steel retort is supported for rotation at only one end, outside of the shell, such that the retort is cantilevered into the shell with the free end extending into the furnace shell. This design requires less maintenance and is more efficient at conserving controlled atmosphere than designs with internal rotation within the heated shell.

Advantages:

• No special pit or foundation.
• Low maintenance – maintenance is limited.
• Flexibility – small or large production runs can be handled alternately or continuously; close control of furnace operation is easily obtained.
• Automation – heat treating is completely automatic after loading raw materials into hopper.
• Uniform loading – a specially designed vibratory hopper and weight-actuated skip loader deposit precisely measured charges into the furnace the rotary draw to complete the rotary retort raw materials heat treating line, offers a rotary retort draw furnace with the same cantilevered retort design advantages as the rotary retort hardening furnace. The furnace features a recirculation system designed to keep heated gases in contact with the work as it progresses through the cycle. Convection heating is used to full advantage for efficient heat transfer in a minimum floor space. The furnace required no pit or special foundation.

Approx. 1.8 Lakh / Unit Get Latest Price

Star trace is one of the most well recognized manufacturers of heavy duty slurry medium duty slurry process pumps vertical slurry pumps ash Slurry Pumps our company manufacturers advanced slurry pumps and process pumps. Our pump handle tougher abrasive solids and slurry found in mining, steel, glass industries and can also be used in gold processing.

STAR TRACE is one of the most well recognized manufacturers of:

• Heavy duty slurry
• Medium duty slurry
• Process pumps
• Vertical slurry pumps
• Ash slurry pumps

Approx. 2 Lakh / Unit Get Latest Price

Electrowinning also called electro extraction, is the electro deposition of metals from their ores that have been put in solution or liquefied.

Description:

• In electrowinning, a current is passed from an inert anode through a liquid leach solution containing the metal.
• So that the metal is extracted as it is deposited in an electroplating process onto the cathode.
• In electro refining, the anodes consist of unrefined impure metal and as the current passes through the acidic electrolyte.
• The anodes are corroded into the solution so that the electroplating process deposits refined pure metal onto the cathodes.

Approx. 1.8 Lakh / Unit Get Latest Price

Filter Press is widely used on various projects which need solid-liquid separation

Classification:

• According to cake discharging type: automatic and manual.
• According to pressing type: automatic and manual.
• According to material of plate: polypropylene, membrane and stainless steel.

Application:

• Municipal waste water treatment
• Ore pulp de-watering
• Food industry
• Pharmaceutical
• Pulp and paper mill sludge
• Livestock manure
• Beverage
• Metallurgy
• Leather sludge
• Aquatic product sludge

Components:

• Frame filter plate filter cloth control cabinet hydraulic station, etc.

Approx. 60,000 / Unit Get Latest Price

The Oil Disc Skimmer is mainly composed of the hydraulic power station, skimmer head (the main unit), hydraulic oil hose and oil pipeline. It is applicable to recover oil spills of various viscosities. It can be widely used for the recovery of oil spills on ocean, rivers, ponds and other areas. The power station operates with the hydraulic oil pump and the oil delivery pump driven by a diesel engine or motor; the main unit is composed of the disc unit, oil collecting channel, buoy and other parts; the main unit floats on the water surface; the power station is located on a boat or bank.

Features:

• The skimmer head floating on water is made of the corrosion resistant glass fiber reinforced plastic, stainless steel or the marine – grade aluminum alloy. It can be used for the recovery of oil spills on waters. It has a solid and endurable structure. The buoy is filled with foams to secure a duai – buoyancy.
• The disc skimmer can recover lubricants, fuels, vegetable oils and other flowable oil spills of low and medium viscosity.
• The disc's rotating speed can be adjusted with a step less speed regulation according to the conditions on the oil spill site to reduce the water content of the recovered oil spills.

Specifications:

Approx. 12,000 / Unit Get Latest Price

Product Brochure
Star Fertilizer Filler is naturally added with micronutrients and secondary nutrient.

Available micro and macronutrients in Star fertilizer filler:

• Iron, sulphur, calcium, magnesium, copper, manganese, sodium, potassium, zinc, and boron.

Physical properties:

• ColStar: light gray
• Bulk density: 1.34
• PH: 7.60
• EC: 2.0 (dSm-1)

Secondary nutrients:

Star fertilizer filler contain the following Secondary nutrients with significant level by nature:

• Calcium oxide: 0.70%
• Magnesium oxide: 1.65%
• Sulphur: 1.31%

The above Star secondary nutrient is act in the below roll when we apply to the crops:

Calcium:

• Utilized for Continuous cell division and formation
• Involved in nitrogen metabolism
• Reduces plant respiration
• Aids translocation of photosynthesis from leaves to fruiting organs
• Increases fruit set
• Essential for nut development in peanuts
• Stimulates microbial activity

Magnesium:

• Key element of chlorophyll production
• Improves utilization and mobility of phosphorus
• Activator and component of many plant enzymes
• Directly related to grass tetany
• Increases iron utilization in plants
• Influences earliness and uniformity of maturity

Sulphur:

• Integral part of amino acids
• Helps develop enzymes and vitamins
• Promotes nodule formation on legumes
• Aids in seed production
• Necessary in chlorophyll formation (though it isn't one of the constituents)
• Star fertilizer filler is having high level iron percentage by nature.
• Iron as Fe – 11.00 %, it act in the below roll, when we apply to the crops. We can able to supply iron percentage as per the customer requirements

Iron:

• Promotes formation of chlorophyll
• Acts as an oxygen carrier
• Reactions involving cell division and growth

The following are the Advantages of Fertilizer Filler:

• It improves the fertilizer quality because of secondary nutrients and micronutrients are present in a single filler
• It helps to improve plant growth and yield production
• It is fine powder and passing through below 300 micron. Since it is grinding ball mill and screened for uniformity in size.
• It is highly cost effective, and 100% eco friendly.
• Mixtures have better physical condition and are easier for application.
• The iron percentage can be increased as per the customer requirements.

Approx. 1.8 Lakh / Unit Get Latest Price

Approx. 1.5 Lakh / Unit Get Latest Price